Hyundai Sonata: Schematic Diagrams - SRSCM - RestraintHyundai Sonata: Schematic Diagrams

Circuit Diagram (1)

Circuit Diagram (2)

Circuit Diagram (3)

SRSCM Connector Terminal

Pin
Function (Connector A)
Pin
Function (Connector B)
A1
IGN-1
B1
Side impact sensor front, Passenger-High (+)
A2
Front impact sensor driver-High (+)
B2
Side impact sensor front, Passenger-Low (-)
A3
Front impact sensor driver-Low (-)
B3
Side impact sensor front, Driver-High (+)
A4
Front impact sensor passenger-High (+)
B4
Side impact sensor front, Driver-Low (-)
A5
Front impact sensor passenger-Low (-)
B5
Pressure side impact sensor passenger-High (+)
A6
C-CAN ACU to Vehicle-Low (-)
B6
Pressure side impact sensor passenger-Low (-)
A7
C-CAN ACU to Vehicle-High (+)
B7
Pressure side impact sensor driver-High (+)
A8
Local CAN IMU to ESC-Low (-)
B8
Pressure side impact sensor driver-Low (-)
A9
Local CAN IMU to ESC-High (+)
B9
-
A10
-
B10
-
A11
-
B11
Ground
A12
Driver airbag 1st stage-High (+)
B12
Retractor pretensioner front, Driver-Low (-)
A13
Driver airbag 1st stage-Low (-)
B13
Retractor pretensioner front, Driver-High (+)
A14
Passenger airbag 1st stage-Low (-)
B14
Retractor pretensioner front, Passenger-High (+)
A15
Passenger airbag 1st stage-High(+)
B15
Retractor pretensioner front, Passenger-Low (-)
A16
Passenger airbag active vent-High (+)
B16
Curtain airbag driver-Low (-)
A17
Passenger airbag active vent-Low (-)
B17
Curtain airbag driver-High (+)
A18
-
B18
Side airbag front, driver-High (+)
A19
-
B19
Side airbag front, driver-Low (-)
A20
-
B20
Side airbag front, passenger-Low (-)
A21
Seat belt reminder
B21
Side airbag front, passenger-High (+)
A22
Crash output
B22
-
A23
Driver airbag 2nd stage-High (+)
B23
-
A24
Driver airbag 2nd stage-Low (-)
B24
-
A25
Passenger airbag 2nd stage-Low (-)
B25
-
A26
Passenger airbag 2nd stage-High (+)
B26
-
A27
Passenger airbag OFF lamp (telltale lamp)
B27
Seat belt buckle sensor front, Driver-High (+)
A28
-
B28
Seat belt buckle sensor front, Driver-Low(-)
A29
-
B29
-
A30
-
B30
-
A31
-
B31
-
A32
-
B32
-
A33
-
B33
Seat belt buckle sensor front, Passenger-Low (-)
A34
-
B34
Curtain airbag passenger-Low (-)
A35
-
B35
Curtain airbag passenger-High (+)
A36
Knee airbag driver-Low (-)
B36
Anchor pretensioner driver-High (+)
A37
Knee airbag driver-High (+)
B37
Anchor pretensioner driver-Low (-)
A38
-
B38
Anchor pretensioner passenger-Low (-)
A39
-
B39
Anchor pretensioner passenger-High (+)
A40
-
B40
-
A41
-
B41
-
A42
-
B42
-
A43
-
B43
-
A44
-
B44
Seat belt buckle sensor front, Passenger-High (-)

    Seat Belt Buckle Switch (BS) Repair procedures
    Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 3. ...

    See also:

    Body Control Module (BCM). Repair procedures
    Trouble Diagnostics When Using GDS 1. The body control module can diagnose by using the GDS more quickly. The BCM communicates with the GDS and then reads the input ...

    Fuel Pump Control Module (FPCM) Schematic Diagrams
    Circuit Diagram Fuel Pressure Control Module (FPCM) Terminal And Input/Output signal FPCM Terminal Function Pin No.DescriptionConnected to1Fuel sender ground Fuel Pump 2Fuel pressure sensor (FPS) ...

    To resume cruising speed at more than approximately 25 mph (40 km/h)
    If any method other than the cruise ON/OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES+ switch ...