Hyundai Sonata: Seat Belt Buckle Switch (BS) Description and Operation - SRSCM - RestraintHyundai Sonata: Seat Belt Buckle Switch (BS) Description and Operation

Description
The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.
    Side Impact Sensor (SIS) Repair procedures
    Removal Pressure Side Impact Sensor     • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnect ...

    See also:

    Digital clock
    WARNING Do not adjust the clock while driving. You may lose your steering control and cause an accident that results in severe personal injury or death. Whenever the battery terminals or relat ...

    Trunk Lid Assembly Components and Components Location
    Component Location 1. Trunk lid assembly ...

    Side repeater light bulb replacement
    If the light bulb is not operating, have the vehicle checked by an authorized HYUNDAI dealer. ...