Hyundai Sonata: Side Body Body Repair - Body Dimensions - Body (Interior and Exterior)Hyundai Sonata: Side Body Body Repair

Side Body A

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Side Body B

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Fender apron tooling hole (O7)
Fender apron panel tooling hole (O7)
Front door upper hinge mounting hole (O13)

Front door lower hinge mounting hole (O13)
Rear door upper hinge mounting hole (O13)
Rear door lower hinge mounting hole (O13)

Quarter panel tooling hole (O14)
Quarter fixed glass mounting hole (O5.4)
Side sill moulding tooling hole (12X16)

Rear combination lamp housing mounting hole (O6)
Quarter panel tooling hole (O14)



    Front Body Body Repair
    Front Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Front Body B * These dimensions indicated in this figure are actual-measurem ...

    Interior Body Repair
    Interior A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Interior B * These dimensions indicated in this figure are actual-measurement ...

    See also:

    Low tire pressure telltale
    When the tire pressure monitoring system warning indicator is illuminated, one or more of your tires is significantly under-inflated. If the telltale illuminates, immediately reduce your speed, a ...

    Repair procedures
    On-vehicle Inpection     • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide) ...

    Front Glass Repair procedures
    Removal     • In order to remove the front glass, use the tools shown in the following figure: [Tooling Diagram] Square wire Insert-type wire grip [Tooling Assembly Di ...