Hyundai Sonata: Side Impact Sensor (SIS) Description and Operation - SRSCM - RestraintHyundai Sonata: Side Impact Sensor (SIS) Description and Operation

Description
Side Impact Sensor (SIS) system consists of two P-SIS which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH).
Side Pressure Sensor is also called P-SIS because it detects pressure due to collision at its mounting location.
Side Impact Sensor is also called G-SIS because it detects acceleration.
SRSCM decides deployment of the airbag and the time of deployment through the collision signal of the SIS when the collision occurred.
    Front Impact Sensor (FIS) Repair procedures
    Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor co ...

    See also:

    Engine Control Module (ECM) Schematic Diagrams
    ECM Terminal And Input/Output signal ECM Terminal Function Connector [C500-A] Pin No.DescriptionConnected to1Injector (Cylinder #3) [High] control outputInjector (Cylinder #3)2Injector (Cylinde ...

    Water pump Repair procedures
    Removal 1. Loosen the drain plug (A), and drain the engine coolant. Remove the radiator cap to drain with speed.     System is under high pressure when the engine is hot.To avoi ...

    Accelerator Position Sensor (APS). Schematic Diagrams
    Circuit Diagram ...