Hyundai Sonata: Special Service Tools - General Information - Engine Mechanical SystemHyundai Sonata: Special Service Tools

Special Service Tools
Tool (Number and name)
Illustration
Use
Crankshaft front oil seal installer
(09455-21200)

Installation of the front oil seal
Valve stem oil seal installer
(09222-2B100)

Installation of the valve stem oil seal
Valve spring compressor and holder
A : (09222-3K000)
B : (09222-3K100)

Removal and installation of the intake or exhaust valve
Crankshaft rear oil seal installer
A : (09231-H1100)
B : (09231-2B200)

Installation of the crankshaft rear oil seal
Ring gear stoppper
(09231-2B100) (A)
(09231-3N100) (B)

Removal and installation of crankshaft pulley bolt.
Ring gear stopper
(09231-3D100) (A)
(09231-2W100) (B)

Removal and installation of crankshaft pulley bolt.
Oil pan remover
(09215-3C000)

Removal of oil pan
Torque angle adapter
(09221-4A000)

Installation of bolts & nuts needing an angular method
Oil filter wrench
(09263-2E000)

Remove and installation of oil filter

    Troubleshooting
    Troubleshooting SymptomSuspect areaRemedyEngine misfire with abnormal internal lower engine noises.Loose or improperly installed engine flywheel.Repair or replace the flywheel as required.Worn pi ...

    See also:

    Inhibitor Switch Specifications
    Specifications ? Type: Combination of output signals from 4 terminals ? Specifications ItemSpecificationsOutput typeCombination of output signalsPower supply (V)12 Signal Code Table ...

    Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure ...

    Automatic climate control system
    1. Turn the ignition switch to the ON position. 2. Select the defrost position pressing defrost button (). 3. While holding the air conditioning button (A/C) pressed, press the air intake contro ...