Hyundai Sonata: Special Service Tools - General Information - Engine Electrical SystemHyundai Sonata: Special Service Tools

Special Service Tools
Tool (Number and name)
Illustration
Use
09373-27000
Alternator pulley remover wrench

Removal and installation of alternator pulley
09964-C1100
SCC reflector

Reflector to align the SCC radar
09964-C1200
Calibration beam

Laser to detect the center of the vehicle.
09964-C1300
Tripod

SCC reflector or vertical / horizontal laser support.

    Specifications
    Specification Ignition System Ignition Coil ItemSpecification Primary Coil Resistance (?)0.56 ± 10% [20°C (68°F)]Secondary Coil Resistance (k?)2.0 ± 15% [20°C (68°F)] Spark Plug ...

    Troubleshooting
    Troubleshooting Ignition System SymptomSuspect AreaRemedyEngine will not start or is hard to start (Cranks OK)Ignition lock switchInspect ignition lock switch, or replace as requiredIgnition c ...

    See also:

    Repair procedures
    Clutch Pedal Inspection And Adjustment 1. Measure the clutch pedal height (from the face of the pedal pad to the floorboard) and the clutch pedal clevis pin play (measured ...

    Front Repair procedures
    Replacement Front Seat Belt Replacement • When installing the belt, make sure not to damaged th ...

    Front Strut Assembly. Components and Components Location
    Components 1. Insulator cap 2. Insulator assembly 3. Strut bearing 4. Spring upper seat 5. Spring upper pad 6. Coil spring 7. Spring lower pad 8. Dust ...