Hyundai Sonata: Special Service Tools - DCT (Dual Clutch Transmission) SystemHyundai Sonata: Special Service Tools

Special Service Tools
Tool
(Number and Name)
Illustration
Use
09200-3N000
Engine support fixture
(Beam)

Removal and installation of the transaxle.
Use this beam (SST No. : 09200-3N000) with the supporter (SST No. : 09200-2S000).
?Permit operating with 09200-38001.
?Refer to the engine support fixture assembly drawing below.
09200-2S000
Engine support fixture
(Supporter)

Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S000).
?Refer to the engine support fixture assembly drawing below.
09430-C1190
Oil seal installer

Installation of the differential oil seal in the transaxle case and housing side.
[Using with bar (SST No.09231-H1100)]
09231-H1100
Bar

Installation of the differential oil seal in the transaxle case and housing side.
[Using with oil seal installer (SST No.:09430-C1190)]
09480-A3800
Inhibitor switch neutral fixed pin

When installing the manual control lever on the inhibitor switch, used to align the neutral position.
09430-C1180
Dual clutch remover

Used for removing dual clutch assembly
09430-2A240
Dual clutch Installer

Used for installing dual clutch assembly
09430-C1300
Clutch abrasion compensation tool

Used for adjusting clutch actuator
Used with the Clutch actuator adjustment jig (09430-C1302)
09430-C1302
Actuator fixing jig & Motor shaft reset tool

Used for adjusting clutch actuator
Used with the Clutch actuator adjuster (09430-C1300)
09430-A5100
Clutch engagement frok fixing jig

Used for removing clutch actuator assembly

? Engine support fixture special tool assembly drawing

1. 09200-3N000(Main bar)
2. 09200-3N000(Sub bar)
3. 09200-3N000(Handle)
4. 09200-3N000(Stopper)
5. 09200-3N000(Stopper)
6. 09200-3N000(Knobe)
7. 09200-3N000(Adapter)
8. 09200-2S000(Supporter)
9. 09200-3N000(Hanger)
10. 09200-3N000(Clip)
11. 09200-3N000(Nut)
12. 09200-3N000(Pin)
13. 09200-2S000(Stopper)
14. 09200-2S000(Spacer)
15. 09200-2S000(Adapter)
16. 09200-2S000(Supporter)
17. 09200-2S000(Nut)

    Specifications
    Specifications Transmission typeD7UF1Egnine typeGasoline 1.6 T-GDITransmission fluidQuantity1.9 ~ 2.0 LSpecified lubricantAPI Service GL-4, SAE 70W• Recommended oil - SHELL: SPIRAX S6 GHME 7 ...

    Troubleshooting
    Troubleshooting Trouble symptomProbable causeRemedyDisplayed the warning lamp "E"(Driving is only possible with 1/ R gear)Not performed DCT learningPerform the DCT manual learning procedure.Impos ...

    See also:

    Accelerator Position Sensor (APS) Schematic Diagrams
    Circuit Diagram ...

    Vehicle data collection and event data recorders
    This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road ...

    Steering Angle Sensor. Description and Operation
    Description The Steering Angle Sensor (SAS) is installed in EPS (Electric Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning ...