Hyundai Sonata: Start/Stop Button Repair procedures - Button Engine Start System - Body Electrical SystemHyundai Sonata: Start/Stop Button Repair procedures

Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the center facia panel.
(Refer to Heating, Ventilation and Air Conditioning - "Controller")
3.
Remove the start/stop button (A) after loosening the screw (3EA).

Installation
1.
Install the start/stop button.
2.
Install the center facia panel.
3.
Connect the negative (-) battery terminal.
    See also:

    Rear Combination Lamp Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Loose the nuts (4EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination ...

    Battery Troubleshooting
    Troubleshooting ...

    Electronic stability control (ESC)
    The Electronic Stability control (ESC) system is designed to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC ap ...