Hyundai Sonata: Starter Relay Repair procedures - Starting System - Engine Electrical SystemHyundai Sonata: Starter Relay Repair procedures

Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the fuse box cover.
3.
Remove the starter relay (A).

4.
Using an ohmmeter, check that there is continuity between each terminal.
Terminal
Continuity
30 - 87
NO
85 - 86
YES

5.
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87.

6.
If there is no continuity, replace the starter relay.
7.
Install the starter relay.
8.
Install the fuse box cover.
    Starter Repair procedures
    Removal 1. Disconnect the battery negative terminal. 2. Remove the battery tray. (Refer to Engine Electrical System - "Battery") 3. Remove the air duct and air cleaner assembly. (Refe ...

    See also:

    Fuel Filler Door Open Switch Components and Components Location
    Components ...

    Specifications
    Specification Item Resistance (Ω) Driver Airbag (DAB) 1.88 ~ 5.8 Passenger Airbag (PAB) 1.88 ~ 5.8 ...

    Curtain Airbag (CAB) Module. Repair procedures
    Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. (Refer to ...