Hyundai Sonata: Starting System - Engine Electrical SystemHyundai Sonata: Starting System

Battery Sensor Repair procedures
Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolts (B). Installation ...

Description and Operation
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and th ...

See also:

Room Lamp. Repair procedures
Inspection Room Lamp 1. Check that the switch operates properly after disconnecting the room lamp connector (A). Removal Room L ...

Muffler. Repair procedures
Removal and Installation 1. Remove the front muffler (B) after disconnecting the oxygen sensor connector (A) (ULEV only). Tightening torque: ...

Input shaft speed sensor 1 Specifications
Specification ItemSpecificationTypeHall effect sensorOperation condition (°C)°F(-40 ~ 150)-40 ~ 302Output signal (mA)High: 11.8 ~ 16.8Low: 5.9 ~ 8.4 ...