Hyundai Sonata: Sunvisor Repair procedures - Roof Trim - Body (Interior and Exterior)Hyundai Sonata: Sunvisor Repair procedures

Replacement
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Loosen the mounting screws, then remove the sunvisor (A) and retainer (B).

2.
Disconnect the sunvisor lamp connector (A).

3.
Install in the reverse order of removal.
   
Make sure the connector is connected properly.
    Sunvisor Components and Components Location
    Component Location 1. Sunvisor2. Retainer ...

    Assist Handle Components and Components Location
    Component Location 1. Assist handle ...

    See also:

    Manual heating and air conditioning
    The heating and cooling system can be controlled manually by pressing buttons or turning knob(s) other than the AUTO button. In this case, the system works sequentially according to the order of b ...

    Smart Key Repair procedures
    Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model a ...

    Intake Manifold. Repair procedures
    Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening tor ...