Hyundai Sonata: Temperature Control Actuator Description and Operation - Heater - Heating, Ventilation and Air ConditioningHyundai Sonata: Temperature Control Actuator Description and Operation

Description
The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.
The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temperature door.
    Temperature Control Actuator Components and Components Location
    Components Location 1. Temperature control actuator [LH]2. Temperature control actuator [RH] ...

    Temperature Control Actuator Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when c ...

    See also:

    Description and Operation
    Description Burglar Alarm System The burglar alarm system is armed automatically after the doors, hood, and trunk lid are closed and locked. The system is set off when any of these ...

    Audio Unit Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia upper panal. (Refer to Body - "Cluster Fascia Upper Panel") 3. Remove the audio head unit (A) after l ...

    Water Temperature Control Assembly Repair procedures
    Removal and Installation 1. Loosen the drain plug, and drain the engine coolant. Remove the radiator cap to drain with speed. 2. Disconnect the battery negative terminal. 3. Remove the air ...