Hyundai Sonata: TPMS Receiver Repair procedures - Tire Pressure Monitoring System - Suspension SystemHyundai Sonata: TPMS Receiver Repair procedures

Replacement
1.
Disconnect the negative (-) battery cable.
2.
Remove the glove box.
(Refer to Body - "Crash Pad")
3.
Remove faulty part and fit bracket assembly to new part.

4.
Secure new part to vehicle and fit connector.
5.
Re-connect battery and turn Ignition on.
6.
After replacing the receiver, learn by using self-diagnosis device(GDS).
[Vehicle name input initialization]

[VIN input initialization]

[Wheel Sensor ID Writing (Wireless) initialization]

    TPMS Receiver Schematic Diagrams
    Circuit Diagram Terminal function Pin NO.Discription1Battery (+)2IGN3CAN_Low4CAN_High5-6Ground ...

    See also:

    Delta Garnish Repair procedures
    Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

    Good driving practices
    Never move the gear shift lever from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. Never move the gear shift lever into P (Park) when the vehicle is in mo ...

    Side Airbag (SAB) Module. Repair procedures
    Removal The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing ...