Hyundai Sonata: TPMS Sensor Description and Operation - Tire Pressure Monitoring System - Suspension SystemHyundai Sonata: TPMS Sensor Description and Operation

Configuration State
1.
Driving state
Sensor transmissions occur every 1 minutes and pressure is measured every 15 seconds.
2.
Stationary state
Sensor transmissions does not occur and pressure is measured every 60 seconds.
3.
Auto learning status
When driving after stopping more than 15 minutes , sensor transmissions occur every 33 seconds and pressure is measured every 10.8 seconds.
4.
Off status
The TPMS sensor is not operated.
Due to stock status, does not measured pressure, temperature, battery status.
5.
Alert State :
When a 2 psi change in pressure from the last transmission occurs, transmit tire information immediately.
The pressure is measured every 2 seconds.
    Description and Operation
    Description The Tire Pressure Monitoring System (TPMS) monitors the pressure and temperature inside the tire in order to warn the driver of changes in pressure which may influence the operatio ...

    TPMS Sensor Repair procedures
    Replacement 1. Remove the tire. (Refer to Tires/Wheels - "Tire") 2. Remove the screw with torx driver (A).     • When installing the bead brake, make sure that it do ...

    See also:

    Closing the fuel filler lid
    1. To install the cap, turn it clockwise until it “click” one time. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it in lightly making sure that it is ...

    Power Window Switch Repair procedures
    Inspection Diagnosis with GDS 1. The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). The diagnostic system (GDS) provides the following informa ...

    Immobilizer Control Unit Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the knee airbag module. (Refer to ...