Hyundai Sonata: Trunk Lid Trim Repair procedures - Trunk Lid - Body (Interior and Exterior)Hyundai Sonata: Trunk Lid Trim Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Raise the cover (A) using a auger.

2.
Loosen the mounting screw and remove the trunk handle (A).

3.
After loosening the mounting screw and clips, then remove the trunk lid trim (A).

4.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Trunk Lid Trim Components and Components Location
    Component Location 1. Trunk lid trim ...

    Trunk Lid Key Holder Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...

    See also:

    Power Seat Control Switch. Repair procedures
    Inspection With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch. A ...

    Engine Coolant Temperature Sensor (ECTS) Schematic Diagrams
    Circuit Diagram ...

    Starter Schematic Diagrams
    Circuit Diagram ...