Hyundai Sonata: Water Pipe Repair procedures - Cooling System - Engine Mechanical SystemHyundai Sonata: Water Pipe Repair procedures

Removal and Installation
1.
Remove the water temperature control assembly.
(Refer to Colling System - "Water Temperature Control Assembly")
2.
Remove the water pipe (A).

Tightening torque
M6 bolt and nuts :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
M8 bolt :
18.6 ~ 23.5N.m (1.9 ~ 2.4kgf.m, 13.7 ~ 17.4lb-ft)

3.
Install in the reverse order of removal.
    Water Pipe Components and Components Location
    Components 1. Water pipe ...

    Water pump Components and Components Location
    Components 1. Gasket2. Water pump 3. Water pump pulley ...

    See also:

    Gear Actuator Assembly Specifications
    Specification ItemConditionSpecificationResistance (line to line)Shift motor 1/2135.4 m? ± 10 %Select solenoid 1/20.7 m? ± 10 %Max. currentShift motor 1/245 ASelect solenoid 1/220 ASelect solen ...

    Seat Heater Switch Schematic Diagrams
    Circuit Diagram ...

    Schematic Diagrams
    Trouble Symptom Charts Component Parts And Function Outline Component partFunctionCruise Control SwitchInput the set speed and distance to the SCC ECU.Instrument ClusterDisplay various information ...