Hyundai Sonata: Water Temperature Control Assembly Components and Components Location - Cooling System - Engine Mechanical SystemHyundai Sonata: Water Temperature Control Assembly Components and Components Location

Components

1. Water temperature control assembly
2. Water temperature sensor
3. Gasket

    Cooling Fan Repair procedures
    Removal and Installation Cooling Fan Assembly 1. Disconnect the battery terminals. 2. Remove the under cover. (Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") 3. Dis ...

    Water Temperature Control Assembly Repair procedures
    Removal and Installation 1. Loosen the drain plug, and drain the engine coolant. Remove the radiator cap to drain with speed. 2. Disconnect the battery negative terminal. 3. Remove the air ...

    See also:

    Impact sensing door unlock system (if equipped)
    All doors will be automatically unlocked when the impact is delivered to impact sensors while the ignition switch is ON. However, the doors may not be unlocked if mechanical problems occur with th ...

    Rail Pressure Sensor (RPS) Troubleshooting
    Signal Waveform ...

    Power Seat Motor Components and Components Location
    Component Location 1. Slide motor2. Front height motor3. Air ventilation seat blower4. Reclining motor5. Lumbar support motor (Vertical)6. Lumbar support motor (Horizontal)7. Rear height motor8. ...