Hyundai Sonata: Accelerator Pedal. Repair procedures - Fuel Delivery System - Engine Control/Fuel SystemHyundai Sonata: Accelerator Pedal. Repair procedures

Removal

1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the accelerator position sensor connector (A).
3.
Remove the installation nuts (B) and bolt (C), and then remove the accelerator pedal module.


Installation

1.
Installation is reverse of removal.
Accelerator pedal module installation nut:
9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
Accelerator pedal module installation bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Filler-Neck Assembly. Repair procedures
    Removal 1. Disconnect the fuel filler hose (A), the vapor tube quick-connector (B), and the ventilation tube quick-connector (C). 2. ...

    Delivery Pipe. Repair procedures
    Removal In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be in ...

    See also:

    Body Control Module (BCM). Components and Components Location
    Components ...

    PDM(Power Distribution Module). Repair procedures
    Inspection PDM Diagnosis With GDS 1. It will be able to diagnose defects of Smart key with GDS quickly. GDS can operates actuator forcefully, input/output valu ...

    Battery replacement
    A smart key battery should last for several years, but if the smart key is not working properly, try replacing the battery with a new one. If you are unsure how to use your smart key or replace ...