Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine control system, so it consists of the two sensors which adapt individual sensor power and ground line. The second sensor monitors the first sensor and its output voltage is half of the first one. If the ratio of the sensor 1 and 2 is out of the range (approximately 1/2), the diagnostic system judges that it is abnormal.

Rail Pressure Sensor (RPS). Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

Accelerator Position Sensor (APS). Specifications

Specification Accelerator Position Output Voltage (V) APS1 APS2 C.T 0.7 ~ 0.8 0.29 ~ 0.46 ...

See also:

Smart key functions
Carrying the smart key, you may lock and unlock the vehicle doors. Also, you may start the engine. Refer to the following, for more details. Locking Using the door handle switch Pressing ...

Front Seat. Repair procedures
Replaccement Seat Assembly Replacement 1. Remove the seat assembly mounting cover. 2. After loosening the seat assembly mounting bolts, rem ...

License Lamp. Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the lens (A) after loosening the mounting screws. ...