Hyundai Sonata: Air intake control
Type A
Type B
Adjusting the driver and passenger side temperature individually
1. Press the DUAL button to operate the driver and passenger side temperature individually. Turning the right temperature control knob will automatically switch to the DUAL mode as well.
2. Turn the left temperature control knob to adjust the driver side temperature. Turn the right temperature control knob to adjust the passenger side temperature.
When the driver side temperature is set to the highest or lowest temperature setting, the DUAL mode is deactivated for maximum heating or cooling.
Adjusting the driver and passenger side temperature equally
1. Press the DUAL button again to deactivate DUAL mode. The passenger side temperature will be set to the same temperature as the driver side temperature.
2. Turn the left temperature control knob. The driver and passenger side temperature will be adjusted equally.
Temperature control
Type A
Type B
The temperature will increase to the maximum by turning the knob to the right.
The temperature will decrease to the minimum by turning the knob to the left.
When turning the ...
Air intake control
Type A
Type B
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air po ...
See also:
Antenna. Repair procedures
Inspection
Glass Antenna Test
1.
Wrap aluminum foil (A) around the tip of the tester probe (B)
as shown.
2.
Touch one tester p ...
Brake Booster. Repair procedures
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop ...
Rear Door. Components and Components Location
Components
1. Door module
2. Window glass
3. Outside handle
4.Outside handle cover
5.Door handle pad
6. Door checker
7. Door speaker
8.Hole plug
...
