Hyundai Sonata: Canister. Repair procedures
Removal
1. |
Disconnect the canister close valve connector (A).
|
2. |
Disconnect the ventilation tube quick-connector (B) and the vapor
tube quick-connectors (C, D).
|
3. |
Remove the installation bolts (E), and then remove the canister.
|
Inspection
1. |
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube
A: Canister ↔ Atmosphere
B: Canister ↔ Fuel Tank
C: Canister ↔ Intake Manifold
|
Installation
Installation is the reverse of removal.
Canister installation bolt:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
|
Repair procedures
Inspection [System Inspection] 1. Disconnect the vapor hose from the throttle body and connect a vacuum pump to the nipple on the throttle body. 2 ...Fuel Filler Cap. Description and Operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap an ...See also:
Mirror. Repair procedures
Replacement
Outside Rear View Mirror Replacement
•
When prying with a flat-tip screwdriver, wra ...
Water pump. Repair procedures
Removal and Installation
1.
Loosen the drain plug, and then drain the engine
coolant. Remove the radiator cap to drain with speed.
2.
Remo ...
Tire replacement
Tread wear indicator
If the tire is worn evenly, a tread wear indicator will appear as a solid band
across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left
on the tir ...