Hyundai Sonata: Clutch Cover And Disc. Repair procedures
Removal
1. |
Remove the transaxle assembly. (Refer to "Manual transaxle system"
in MT group)
|
2. |
Remove the clutch cover bolts. Not to be bent or twisted, loosen
them in diagonal directions.
|
Installation
If reinstalling used cover, the cover should be installed with
its clutch disc as a set.
|
1. |
Replace a clutch cover and disc as a set.
|
2. |
Apply grease on a disc spline part and transmission input shaft
spline part as required.
|
3. |
The 'T/M SIDE' marked surface should face the transmission.
|
4. |
Install the clutch disc and the cover with SST (A).
|
5. |
Install the clutch cover bolts. Gradually tighten the bolts according
to the order specified in the illustration until the specified torque
is reached.
|
6. |
Install the transaxle assembly.( Refer to "Manual transaxle system"
in MT group.)
|
7. |
Perform the bleeding air procedure in the concentric slave cylinder.
(Refer to Repair procedure in this group.)
|
Clutch Cover And Disc. Components and Components Location
Components 1. Clutch disc 2. Clutch cover 3. Manual transaxle 4. Engine flywheel ...Clutch Pedal. Components and Components Location
Components 1. Flexibie hose 2. Flexibie 3. Turn over spring 4. Cowl bracket 5. Ignition lock switch 6. Clutch member assembly 7. Clutch arm 8. Pedal pa ...See also:
Description and Operation
Function Of Safety Power Window
When driver door power window auto-up switch is operated, safety function
is activated.
1.
Safety function condition
When detect ...
Front Wiper Motor. Repair procedures
Removal
1.
Loosen the windshield wiper arm nut (A) after removing a wiper
cap (B).
2.
Remove the windshield wiper arm and blade (A ...
MAX A/C-Level (B, D)
To operate the MAX A/C, turn the temperature knob to extreme left. Air flow is
directed toward the upper body and face. In this mode, the air conditioning and
the recirculated air position wil ...