Hyundai Sonata: Console. Repair procedures - Interior - Body (Interior and Exterior)Hyundai Sonata: Console. Repair procedures

Replacement

Floor Console Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the crash pad garnish (A).

2.
Using a screwdriver, remove the knob (A) and boots (B).

3.
Using a screwdriver or remover, remove the console upper cover (A).

4.
Disconnect the connectors (A).

5.
Remove the extension side cover (A).

6.
Remove the console tray mat (A).

7.
After loosening the console mounting screws and bolts, then remove the console assembly (A).

8.
Installation is the reverse of removal.
•
Make sure all connectors are connected properly.
•
Replace any damage clips.
Armrest Replacement
1.
After loosening the mounting screws, then remove the console rear cover (A).

2.
After loosening the mounting screws, then remove the armrest (A).

3.
Installation is the reverse of removal.

    Console. Components and Components Location
    Components 1. Console assembly 2. Console upper cover 3. Extension side cover 4. Crash pad garnish ...

    Crash Pad. Components and Components Location
    Components 1. Main crash pad 2. Air vent 3. Center air vent 4. Cluster lower panel 5. Cluster assembly 6. Cluster facia side panel 7. Key set bezel 8. ...

    See also:

    Components and Components Location
    Component Location 1. Head lamp (Low) 2. Head lamp (High) 3. Front fog lamp 4. Turn signal/ Position lamp 5. Tail lamp 6. High mounted stop lamp 7. Tail lamp/Stop ...

    Satellite radio reception
    You may experience difficulties in receiving XMâ„¢ satellite radio signals in the following situations. If you are driving in a tunnel or a covered parking area. If you are driving beneath t ...

    Description and Operation
    Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, ...