Hyundai Sonata: Crankshaft Position Sensor (CKPS). Repair procedures
Inspection
1. |
Check the signal waveform of the CMPS and CKPS using the GDS.
|
Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the crankshaft position sensor connector (A).
|
3. |
Remove the protector (A).
|
4. |
Remove the installation bolt (A), and then remove the crankshaft
position sensor.
|
Installation
|
|
|
1. |
Installation is reverse of removal.
|
Crankshaft Position Sensor (CKPS). Schematic Diagrams
Circuit Diagram ...Camshaft Position Sensor (CMPS). Description and Operation
Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the ...See also:
Seat belt warning (for front passenger’s seat)
Type A
Type B
The front passenger's seat belt warning light will activate to the following
table when the ignition switch is in "ON" position.
*1 The seat belt warning lig ...
Special Service Tools
Special Service Tools
Tool (Number and name)
Illustration
Use
Crankshaft front oil seal installer
(09214-3K000)
(09231-H1100)
...
Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning
is reduced. Overfilling also has a negative influence on the air conditioning system.
Therefore, if abnormal operation ...