Hyundai Sonata: Description and Operation
Description
The ECM (Electro Chromatic inside rear view Mirror) is for dimming the
reflecting light from a vehicle behind at night, Preventing glare from the light.
The forward facing sensor detects brightness of the surroundings, while the
rearward looking sensor detects the strength of the reflecting light and adjusts
the reflexibility of the mirror in the range of 7~85%. But, when the reverse
gear is engaged, it stops functioning.
1. |
The forward facing sensor sees if the brightness of the surroundings
is low enough for the mirror to operate its function.
|
2. |
The rearward looking sensor detects glaring of the reflecting
light from a vehicle behind.
|
3. |
The ECM is darkened to the level as determined by the rearward
looking sensor. When the glaring is no longer detected, the mirror stops
functioning.
1. LED indicator
2. ON/OFF Switch
3. Rearward looking sensor
4. Forward looking sensor
|
Components and Components Location
Components ...Repair procedures
Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. ...See also:
Description and Operation
OBD-II review
1. Overview
The California Air Resources Board (CARB) began regulation of On Board
Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model
year. The ...
Solenoid valve. Repair procedures
Removal
1.
Remove the battery and the battery tray. (Refer to
"Charging system" in EE group.)
2.
Remove the under cover (A).
...
Start/Stop Button. Components and Components Location
Component
...