Hyundai Sonata: Description and Operation
Description
Back view camera will activate when the backup light is ON with the ignition
switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehicle through
the AV monitor while backing-up.
This system is a supplementary function only. It is the responsibility
of the driver to always check the inside/ outside rearview mirror and
the area behind the vehicle before and during backing up because there
are blind spots that can't be seen through the camera.
|
Schematic Diagrams
Circuit Diagram ...Repair procedures
Removal Back View Camera 1. Remove the screws, clip and trunk lid trim in the trunk. (Refer to the BD group - "Trunk Lid") 2. ...See also:
Air intake control
This is used to select outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
The indicator ...
Thermostat. Troubleshooting
Troubleshooting
Symptoms
Possible Causes
Remedy
Coolant leakage
•
From the thermostat gasket
...
Tires and wheels
* Normal load : Up to 3 persons ...