The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable.

When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.

The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.

The contacts close and the starter motor cranks. In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns.

Starting System

...

Repair procedures

Starter Circuit Troubleshooting The battery must be in good condition and fully charged. 1. Discon ...

See also:

Rear Repair procedures
Replacement Rear Seat Belt Replacement • When installing the belt, make sure not to damaged the ...

Front Strut Assembly. Components and Components Location
Components 1. Insulator cap 2. Insulator assembly 3. Strut bearing 4. Spring upper seat 5. Spring upper pad 6. Coil spring 7. Spring lower pad 8. Dust ...

Engine start/stop button position
OFF To turn off the engine, press the engine start/stop button with the engine start/stop button in the ON position and the shift lever in P(Park). When you press the engine start/stop button wit ...