Hyundai Sonata: ESC Control Module. Repair procedures
Removal
1. |
Turn the ignition switch OFF.
|
2. |
Remove the air cleaner assembly (A).
|
3. |
Pull up the lock of the HECU connector , then disconnect the connector.
|
4. |
Disconnect the brake tubes from the HECU by unlocking the nuts
counterclockwise with a spanner.
|
5. |
Loosen the HECU bracket bolts (A), then remove HECU and bracket.
|
6. |
Remove the 2 nuts (B), then remove the bracket from HECU.
|
Installation
1. |
Installation is the reverse of removal.
|
2. |
Tighten the HECU mounting bolts and nuts to the specified torque.
|
3. |
After installation, bleed the brake system.(Refer to ABS bleeding)
|
ESC Control Module. Components and Components Location
Components 1. Front - left tube 2. Rear - right tube 3. Rear - left tube 4. Front - right tube 5. MC2 6. MC1 7. ESC control module(HECU) 8. Damper 9 ...Front Wheel Speed Sensor. Components and Components Location
Components 1. Front wheel speed sensor connector 2. Front wheel speed sensor ...See also:
Output Speed Sensor. Description and Operation
Description
- Integrated one unit for input & output speed sensor
- Differential current type (low: 7mA, high: 14mA)
- Failsafe: 4th gear hold (D), 2nd ~ 4th manual shift (S)
...
Intake Air Temperature Sensor (IATS). Specifications
Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 ~ 48.35
-20
...
Power Window Relay. Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the junction box.
3.
Check for continuit ...