Hyundai Sonata: Fender. Repair procedures - Exterior - Body (Interior and Exterior)Hyundai Sonata: Fender. Repair procedures

Replacement

•
Be careful not to damage the hood and body.
•
Use a clip remover when removing clips.
1.
Remove the front bumper.
(Refer to the BD group - "Front Bumper")
2.
Loosen the mud guard mounting screws.
3.
After loosening the mounting screws and clips, then remove the side sill garnish (A).
4.
After loosening the mounting screw and bolt, then remove the front bumper side mounting bracket (A).
5.
After loosening the fender mounting screw and bolts, then remove the fender (A).
6.
Installation is the reverse of removal.

    Exterior
    ...

    Hood. Repair procedures
    Replacement Hood Assembly Replacement • When removing and installing the hood, an assistant is ...

    See also:

    In case of an emergency while driving
    If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you h ...

    Changing a tire with TPMS
    If you have a flat tire, the Low Tire Pressure will come on. Have the flat tire repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat tire with the spare tire. CAUTION ...

    Temperature control
    The temperature control knob allows you to control the temperature of the air flowing from the ventilation system. To change the air temperature in the passenger compartment, turn the knob to ...