Hyundai Sonata: Filler-Neck Assembly. Repair procedures
Removal
| 1. |
Disconnect the fuel filler hose (A), the vapor tube quick-connector
(B), and the ventilation tube quick-connector (C).
|
| 2. |
Remove the rear-LH wheel, tire, and the inner wheel house.
|
| 3. |
Open the fuel filler door and unfasten the filler-neck assembly
mounting screw (A).
|
| 4. |
Remove the filler-neck assembly from the vehicle after removing
the bracket mounting bolts (A).
|
Installation
| 1. |
Installation is reverse of removal.
|
Fuel Filter. Repair procedures
Replacement
1.
Remove the fuel pump (Refer to “Fuel Pump” in this group).
2.
Disconnect the electric pump wiring connector (A) and the fuel ...
Accelerator Pedal. Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor conn ...
See also:
Air bag warning light
The purpose of air bag warning light in your instrument panel is to alert you
of a potential problem with your air bag - Supplemental Restraint System (SRS).
When the ignition switch is turned ON ...
Preparation Of Tools And Measuring Equipment
Be sure that all necessary tools and measuring equipment
are available starting work.
Special Tools
Use special tools when they are required.
Removal Of Parts
First find th ...
Flex Steer. Description and Operation
Instruction
Flex Steer is system to choose the three modes power steering depending
on driver preference or driving conditions.
...
