Hyundai Sonata: Fob Holder. Repair procedures - Button Engine Start System - Body Electrical SystemHyundai Sonata: Fob Holder. Repair procedures

Removal

1.
Disconnect the negative(-) battery terminal.
2.
Remove the floor console.
(Refer to the BD group - "Console")
3.
Disconnect the fob holder connector (A).
4.
Remove the fob holder (A) by pushing both sides of the hooks.

Installation

1.
Install the fob holder.
2.
Install the floor console.

    See also:

    Warning on the LCD screen
    Key is not in vehicle If the smart key is not in the vehicle and if any door is opened or closed with the engine start/stop button in ACC, ON, or START, the warning illuminates on the LCD scr ...

    To decrease the cruising speed
    Follow either of these procedures: Push the SET- switch and hold it. Your vehicle will gradually slow down. Release the switch at the speed you want to maintain. Push the SET- switch and ...

    Interior Trim. Components and Components Location
    Components 1. Front pillar trim 2. Center pillar upper trim 3. Center pillar lower trim 4. Rear pillar trim 5. Cowl side trim 6. Front door scuff trim 7. ...