Hyundai Sonata: Front Bumper. Repair procedures - Bumper - Body (Interior and Exterior)Hyundai Sonata: Front Bumper. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
•
Take care not bend or scratch the cover and other parts.
1.
Remove the mounting clips.
2.
Remove the radiator upper cover mounting clips.
3.
After loosening the front bumper side’s mounting screw, then disconnect the side’s.
4.
Remove the front bumper after pull out the front bumper.
•
When you pull out the front bumper, the font bumper could be damaged by the projection (A).

5.
Disconnect the connector (A).
6.
Installation is the reverse of removal.

    Front Bumper. Components and Components Location
    Components 1. Front bumper cover 2. Energy absorber 3. Front bumper rail ...

    Rear Bumper. Components and Components Location
    Components 1. Rear bumper cover 2. Energy up sober 3. Rear bumper side bracket ...

    See also:

    Schematic Diagrams
    Circuit Diagram (1) Circuit Diagram (2) Circuit Diagram (3) SRSCM Connector Terminal Pin Function (Connector A) Pin Function (Co ...

    Delivery Pipe. Repair procedures
    Removal In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be in ...

    Rheostat. Repair procedures
    Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the lower crash pad switch (A) from the side crash pad cover by usin ...