Hyundai Sonata: Front Lower Arm. Repair procedures - Revised - Front Suspension System - Suspension SystemHyundai Sonata: Front Lower Arm. Repair procedures - Revised

Replacement

1.
Remove the front wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Loosen the bolt & nut and then remove the lower arm (A).
Tightening torque:
98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

3.
Remove the front lower arm (A) and then loosen the bolts & nuts.
Tightening torque
Front:
137.3~156.9 N.m (14.0~16.0 kgf.m, 101.3~115.7 lb-ft)
Rear:
98.1~117.7 N.m (10.0~12.0 kgf.m, 72.3~86.8 lb-ft)

4.
Installation is the reverse of removal.

Replacement

1.
Remove the front wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Loosen the bolt & nut and then remove the lower arm (A).
Tightening torque:
98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

3.
Remove the front lower arm (A) and then loosen the bolts & nuts.
Tightening torque
Front:
137.3~156.9 N.m (14.0~16.0 kgf.m, 101.3~115.7 lb-ft)
Rear:
98.1~117.7 N.m (10.0~12.0 kgf.m, 72.3~86.8 lb-ft)

4.
Installation is the reverse of removal.

Inspection

1.
Check the bushing for wear and deterioration.
2.
Check the all bolts and nuts.

    Front Strut Assembly. Repair procedures - Revised
    Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

    Front Stabilizer Bar. Repair procedures - Revised
    Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

    See also:

    CVVT Oil Control Valve (OCV). Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the ...

    Emergency starting
    Connect cables in numerical order and disconnect in reverse order. Jump starting Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicl ...

    Antenna
    Glass antenna When the radio power switch is turned on while the engine start/stop button is in either the “ON” or “ACC” position, your car will receive both AM and FM broadcast signa ...