Hyundai Sonata: Front Wheel Speed Sensor. Repair procedures
Removal
1. |
Remove the front wheel and tire.
|
2. |
Remove the front wheel speed sensor mounting bolt (A).
|
3. |
Remove the front wheel guard .
|
4. |
Remove the front wheel speed sensor cable mounting bolt (A).
|
5. |
Disconnect the front wheel speed sensor connector, then remove
the front wheel speed sensor.
|
6. |
Installation is the reverse of removal.
|
Inspection
1. |
Measure the output voltage between the terminal of the wheel speed
sensor and the body ground.
|
2. |
Compare the change of the output voltage of the wheel speed sensor
to the normal change of the output voltage as shown below.
|
Front Wheel Speed Sensor. Components and Components Location
Components 1. Front wheel speed sensor connector 2. Front wheel speed sensor ...Rear Wheel Speed Sensor. Components and Components Location
Components 1. Rear wheel speed sensor cable 2. Rear wheel speed sensor ...See also:
Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions:
(1) OFF position
(2) Parki ...
Knock Sensor (KS). Description and Operation
Description
Knocking is a phenomenon characterized by undesirable vibration and noise
and can cause engine damage. Knock Sensor (KS) is installed on the cylinder
block and senses engine knoc ...
Timing Chain. Components and Components Location
Components
1. Intake camshaft
2. Exhaust camshaft
3. Intake CVVT assembly
4. Exhaust CVVT assembly
5. Timing chain
6. Timing chain guide
7. Timing chain t ...