A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating the seal has been set.

Canister. Repair procedures

Removal 1. Disconnect the canister close valve connector (A). 2. Disconnect the ventilation tube quick-connector (B) and the vapor tube qu ...

Fuel Tank Air Filter. Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the canister close valve connector (A ...

See also:

Rear seat
Headrest The rear seat(s) is equipped with headrests in all the seating positions for the occupant's safety and comfort. The headrest not only provides comfort for passengers, but also he ...

Bulb wattage
...

General Information
General 1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure ...