Hyundai Sonata: Fuel Filler Door Release Actuator. Repair procedures - Fuel Filler Door - Body Electrical SystemHyundai Sonata: Fuel Filler Door Release Actuator. Repair procedures

Inspection

1.
Remove the trunk room left side trim.
(Refer to the BD group - "Interior trim")
2.
Open the fuel filler door and remove the housing (A).
Do not reuse the fuel filler door housing.

3.
Remove the fuel filler door release actuator (A) after loosening the mounting bolts.

4.
Disconnect the release actuator connector (A).

5.
Check for continuity between terminal No.1 and No.2.
If there is no continuity, replace the fuel filler door opener.


    Components and Components Location
    Component Location 1. Fuel filler door open switch 2. Fuel filler door release actuator ...

    Fuel Filler Door Open Switch. Repair procedures
    Inspection 1. Remove the switch assembly (A) from the crash pad lower panel. 2. Disconnect the switch connector. 3 ...

    See also:

    Specifications
    Specifications Items Specifications Rated voltage 5V Load Max. 1mA (When head lamp lighting) Illumin ...

    Components and Components Location
    Components Location 1. PCV Valve 2. Canister 3. Purge Control Solenoid Valve (PCSV) 4. Fuel Tank Pressure Sensor (FTPS) 5. Canister Close Valve (CCV) 6. Fuel ...

    Additional safety precautions
    Never let passengers ride in the cargo area or on top of a foldeddown back seat. All occupants should sit upright, fully back in their seats with their seat belts on and their feet on the flo ...