Hyundai Sonata: Fuel Pressure Control Valve. Repair procedures
Inspection
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the fuel pressure regulator valve connector.
|
3. |
Measure resistance between the fuel pressure regulator valve terminals
1 and 2.
|
4. |
Check that the resistance is within the specification.
|
Fuel Pressure Control Valve. Schematic Diagrams
Circuit Diagram ...Canister Close Valve (CCV). Description and Operation
Description Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage d ...See also:
General Service Information
Protection Of The Vehicle
Always be sure to cover fenders, seats, and floor areas before
starting work.
The support rod ...
Ignition switch position
LOCK
Without the immobilizer
The steering wheel locks to protect against theft. The ignition key can be removed
only in the LOCK position. When turning the ignition switch to the LOCK position ...
Variable Intake Solenoid (VIS) Valve. Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance betwe ...