Hyundai Sonata: Hazard Lamp Switch. Repair procedures
Inspection
1. |
Remove the center fascia panel.
(Refer to the BD group - "Crash pad")
|
2. |
Disconnect the switch from the center fascia panel.
|
3. |
Operate the switch and check for continuity between terminals.
|
Removal
1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the crash pad garnish.
(Refer to the BD group - "Crash pad")
|
3. |
Remove the center fascia panel (B) with hazard lamp switch (A).
|
4. |
Disconnect the hazard lamp switch connector (A) and heater control
unit connector (B).
|
Installation
1. |
Install the hazard lamp switch.
|
2. |
Install the center fascia panel.
|
3. |
Install the crash pad garnish.
|
License Lamp. Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the lens (A) after loosening the mounting screws. ...Rheostat. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the lower crash pad switch (A) from the side crash pad cover by usin ...See also:
MENU : Audio CD
Press the CD MP3 mode key to set
the Repeat, Random, Information features.
Repeat
Press the key
► Set [
RPT] through the TUNE knob or
key to repeat the current song.
❈ Pres ...
Seat Belt Pretensioner (BPT). Description and Operation
Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH
& RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt hel ...
Components and Components Location
Components
1. Telemetics Unit (TMU)
2. AVN or Audio Head Unit
3. Room Mirror Switch (Blue Link button, Center button, SOS button)
4. Mic
5. Roof Antenna (GPS+CD ...