Hyundai Sonata: Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible.
The hazard warning lights are turned on by pushing in the hazard switch. This causes all turn signal lights to blink. The hazard warning lights will operate even though the key is not in the ignition switch.
To turn the hazard warning lights off, push the switch a second time.
Rear view camera
WARNING
This system is a supplementary function only. It is the responsibility of
the driver to always check the inside/outside rearview mirror and the area behind
the vehicle before ...
Lighting
...
See also:
Balance Shaft & Oil Pump. Components and Components Location
Components
1. Balance shaft & oil pump assembly
2. Balance shaft chain tensioner
3. Balance shaft chain
4. Balance shaft chain sprocket
5. Balance shaft cha ...
Components and Components Location
Component Location
1. Audio unit
2. Midrange speaker
3. External amplifier
4. Glass antenna (AM/FM)
5. Front door speaker
6. Rear door speaker
7. Woofer s ...
CVVT (Continuously Variable Valve Timing) System. Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated ...
