Hyundai Sonata: Heated Oxygen Sensor (HO2S). Repair procedures
Inspection
1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the HO2S connector.
|
3. |
Measure resistance between the HO2S terminals 4 and 5 [B1/S1].
|
4. |
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
|
5. |
Check that the resistance is within the specification.
|
Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the connector (A), and then remove the sensor (B).
[Bank 1 / Sensor 1]
(SULEV)
(ULEV)
[Bank 1 / Sensor 2]
(SULEV)
(ULEV)
|
Installation
|
|
1. |
Installation is reverse of removal.
|
Heated Oxygen Sensor (HO2S). Schematic Diagrams
Circuit Diagram ...Rail Pressure Sensor (RPS). Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built ...See also:
All season tires
HYUNDAI specifies all season tires on some models to provide good performance
for use all year round, including snowy and icy road conditions. All season tires
are identified by ALL SEASON and/or ...
Instrument Cluster. Repair procedures
Inspection
Speedometer
1.
Adjust the pressure of the tires to the specified level.
2.
Drive the vehicle onto a speedometer tester. Use whee ...
Low tire pressure telltale
When the tire pressure monitoring system warning indicator is illuminated, one
or more of your tires is significantly under-inflated.
If the telltale illuminates, immediately reduce your speed, a ...