Hyundai Sonata: Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position. To improve the effectiveness of heating
and cooling :
- Heating:
- Cooling: 3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air or recirculated air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
Manual climate control system
Type A Type B 1. Front windshield defrost button 2. Rear window defroster button 3. Fan speed control knob 4. Mode indicator 5. Mode selection button 6. Air intake control button 7. Air co ...Mode selection
Type A The mode selection button controls the direction of the air flow through the ventilation system. The air flow outlet port is converted as follows: Face-Level (B, D, E C, F) Air flow ...See also:
Specifications
Specifications
Manual transaxle type
M6GF2
Engine type
Gasoline 2.4 GDI
Gear ratio
1st
3.267
...
Eco Coach
• What is Eco Coach?
Every 2.5 minutes, Eco Coach compares your fuel economy against the government
tested average (EPA) or other similar Hyundai models (community), based on your
preference. ...
Relay Box (Engine Compartment). Description and Operation
Description
Network Configuration
The Network of the SJB(Smart Junction Box) consists of Low speed CAN as
shown in the following figure.
Termination Resistor
The SJB has CAN ter ...