Hyundai Sonata: High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back for low beams.
The high beam indicator will light when the headlight high beams are switched on.
To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine is not running.
WARNING
Do not use high beam when there are other vehicles. Using high beam could obstruct the other driver's vision.
To flash the headlights, pull the lever towards you. It will return to the normal (low beam) position when released. The headlight switch does not need to be on to use this flashing feature.
Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions:
(1) OFF position
(2) Parki ...
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). Green arrow indicators on the instrument
panel indicate which turn ...
See also:
Description and Operation
Description
Burglar Alarm System
The burglar alarm system is armed automatically after the doors, hood,
and trunk lid are closed and locked.
The system is set off when any of these ...
Description and Operation
Description
The immobilizer system will disable the vehicle unless the proper ignition
key is used. In addition to the currently available anti-theft systems such
as car alarms, the immobili ...
Restrictions in handling keys
When leaving keys with parking lot and valet attendants, the following procedures
will ensure that your vehicle’s trunk and glove box compartment can only be opened
with the master key.
Lock
W ...
