Hyundai Sonata: Inhibiter Switch. Description and Operation
Description
|
Item |
Specification |
|
Type |
Combination of output signals from 4 terminals |
|
Power supply |
12V |
|
Range detection |
7-position (P, R, N, D, X, Y, Z) |
|
Failsafe |
1st, 2nd gear is prohibited. |
Transaxle Oil Temperature Sensor. Repair procedures
Removal
1.
Remove the battery and the battery tray. (Refer to
"Charging system" in EE group.)
2.
Remove the under cover (A).
...
Inhibiter Switch. Repair procedures
Removal
1.
Set room side lever and T/M side lever to "N" position.
2.
Remove the battery and the battery tray. (Refer to
&q ...
See also:
Repair procedures - Revised
Fuel Pressure Test
1.
Release the residual pressure in fuel line (Refer to “Release
Residual Pressure in Fuel Line” in this group).
...
Checking the coolant level
WARNING
Removing radiator cap
Never attempt to remove the radiator cap while the engine is operating
or hot. Doing so might lead to cooling system and engine damage and could result
in se ...
Engine start/stop button position
OFF
To turn off the engine, press the engine start/stop button with the engine start/stop
button in the ON position and the shift lever in P(Park). When you press the engine
start/stop button wit ...
