Hyundai Sonata: Inhibiter Switch. Repair procedures - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Sonata: Inhibiter Switch. Repair procedures

Removal

1.
Set room side lever and T/M side lever to "N" position.
2.
Remove the battery and the battery tray. (Refer to "Charging system" in EE group.)
3.
Remove the air cleaner assembly. (Refer to "Intake manifold" in EM group.)
4.
Remove the shift cable mounting nut (B).
5.
Disconnect the inhibitor switch connector (A).
6.
Remove the manual control lever (A) and the washer (B) after removing a nut (C).

When installing, fix the manual control lever and the inhibitor switch with Ø5mm (0.1969in.) fixing jig.
And then tighten the inhibitor assembly mounting bolts.
7.
Remove the inhibitor assembly (A) after removing the bolts (2ea).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

When installing, tighten the inhibitor assembly mounting bolt lightly.

Installation

1.
Installation is the reverse of removal.

    Inhibiter Switch. Description and Operation
    Description Item Specification Type Combination of output signals from 4 terminals  Power supply 12V ...

    Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure ...

    See also:

    Description and Operation
    Description System Overview The System offers the following features: - Human machine interface through a 1-stage button, for terminal switching and engine start. ...

    Rear Shock Absorber. Components and Components Location
    Components 1. Self locking nut 2. Bracket assembly 3. Bumper rubber 4. Dust cover 5. Shock absorber ...

    Knock Sensor (KS). Schematic Diagrams
    Circuit Diagram ...