Hyundai Sonata: Manual Transaxle. Components and Components Location
Components
|
1. Transaxle case 2. Taper roller bearing outer race 3. 1st/2nd shift fork 4. Reverse shift fork 5. Shift rail 6. 3rd/4th shift fork |
7. 5th/6th shift fork 8. Spring pin 9. Input shaft 10. Oil guide 11. 1st output shaft 12. 2nd output shaft |
13. Differential assembly 14. Needle bearing 15. Clutch housing 16. Concentric slave cylinder assembly 17. Boot 18. Control shaft complete |
Repair procedures
Service Adjustment Procedure
Transmission Oil Inspection And Replacement
1.
Park the vehicle on a level ground and stop the engine.
2.
...
Manual Transaxle. Repair procedures
Removal
1.
Remove the air duct(A).
2.
Remove the engine cover(B).
3.
Remove the air cleaner assembly(C).
...
See also:
Injector. Schematic Diagrams
Circuit Diagram
...
Air intake control
This is used to select outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
The indicator ...
Output Speed Sensor. Description and Operation
Description
- Integrated one unit for input & output speed sensor
- Differential current type (low: 7mA, high: 14mA)
- Failsafe: 4th gear hold (D), 2nd ~ 4th manual shift (S)
...
