Hyundai Sonata: Muffler. Repair procedures - Intake And Exhaust System - Engine Mechanical SystemHyundai Sonata: Muffler. Repair procedures

Removal and Installation

1.
Remove the front muffler (B) after disconnecting the oxygen sensor connector (A) (ULEV only).

Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

2.
Remove the center muffler (B) after disconnecting the oxygen sensor connector (A) (ULEV only).

Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

3.
Remove the main muffler (A).

Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

4.
Installation is the reverse order of removal.
When installing, replace with new gaskets.

    Muffler. Components and Components Location
    Components 1. Front muffler 2. Catalytic converter & center muffler assembly 3. Main muffler 4. Gasket 5. Hanger ...

    See also:

    Valve Body. Repair procedures
    Removal 1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...

    Room Lamp. Repair procedures
    Inspection Room Lamp 1. Check that the switch operates properly after disconnecting the room lamp connector (A). Removal Room L ...

    Wheel alignment and tire balance
    The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels al ...