Hyundai Sonata: Parts - General InformationHyundai Sonata: Parts

When replacing parts, use HYUNDAI genuine parts.

Replacement Standard values, such as torques and certain adjustments, must be strictly observed in the reassembly of all parts. If removed, the following parts should always be replaced with new ones.
1. Oil seals
2. Gaskets
3. O-rings
4. Lock washers
5. Cotter pins (split pins)
6. Plastic nuts

Depending on their location.
7. Sealant should be applied to gaskets.
8. Oil should be applied to the moving components of parts.
9. Specified oil or grease should be applied to the prescribed locations (oil seals, etc) before assembly.

Adjustment Use gauges and testers to adjust correctly the parts to standard values correctly.  
    Preparation Of Tools And Measuring Equipment
    Be sure that all necessary tools and measuring equipment are available starting work. Special Tools Use special tools when they are required. Removal Of Parts First find th ...

    Electrical System
    1. Be sure to disconnect the battery cable from the negative (-) terminal of the battery. 2. Never pull on the wires when disconnecting c ...

    See also:

    Opening the fuel filler lid
    The fuel filler lid must be opened from inside the vehicle by pushing the fuel filler lid opener button. ✽ NOTICE If the fuel filler lid will not open because ice has formed around it, ...

    Exterior care
    Exterior general caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label. Finish mai ...

    Power Out Side Mirror Switch. Components and Components Location
    Component ...