Hyundai Sonata: PDM(Power Distribution Module). Repair procedures - Button Engine Start System - Body Electrical SystemHyundai Sonata: PDM(Power Distribution Module). Repair procedures

Inspection

PDM Diagnosis With GDS
1.
It will be able to diagnose defects of Smart key with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring and self diagnosis.
2.
Select model and "Smart key system (Button start)" menu if you want to check PDM.
3.
Select "PDM" in the manu.
4.
Select "Current Data", if you want to check current data of PDM.
It provides the input/output status of each module.
5.
If you want to check PDM data operation forcefully, select "Actuation test".
Input/output Current Data
NO
 Description
 Unit
1
 Load Battery Voltage
 V
2
 Abs Speed Sensor(main)
 Km/h
3
 Start Stop Button SW
 OFF/ON
4
 ACC input
 OFF/ON
5
 IGN1 Input
 OFF/ON
6
 IGN2 Input
 OFF/ON
7
 Fob In Switch
 RELEASE/INSERT
8
 Start Relay Monitoring Input
9
 SSB Ember LED Output
 OFF/ON
10
 SSB Blue LED Output
 OFF/ON
11
 Fob Holder Illumination Output
 OFF/ON
12
 SSB Illumination Output
 OFF/ON
13
 ACC Relay Output
 OFF/ON
14
 IGN1 Relay Output
 OFF/ON
15
 IGN2 Relay Output
 OFF/ON
16
 Start Relay S1 Output
 OFF/ON
17
 -
 -
18
 -
 -
19
 CPU Battery Voltage
 V
20
 Engine Speed
 DATA*1.0
21
 ACC Relay SCB
 OFF/ON
22
 IGN1 Relay SCB
 OFF/ON
23
 IGN2 Relay SCB
 OFF/ON
24
 Start Relay SCB
 OFF/ON
25
 SCC Relay Open
 OFF/ON
26
 IGN1 Relay Open
 OFF/ON
27
 IGN2 Relay Open
 OFF/ON
28
 ACC Output SCB
 OFF/ON
29
 IGN1 Output SCB
 OFF/ON
30
 IGN2 Output SCB
 OFF/ON
31
 Start Output SCB
 OFF/ON
32
 ACC Output SCG
 OFF/ON
33
 IGN1 Output SCG
 OFF/ON
34
 IGN2 Output SCG
 OFF/ON
35
 Start Output SCG
 OFF/ON

Actuation Test
No.
 Description
1
 SSB Ember LED
2
 SSB Blue LED
3
 Fob Holder Illumination
4
 SSB Illumination
5
 ACC Output
6
 ING1 Output
7
 ING2 Output
8
 Start Output
9
 -

ESCL OPEN STATUS CHECK
1.
Select the "ESCL open status check" menu if you want to check ESCL open.

Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to the BD group - "Crash pad")
3.
Remove the smart key unit (A) and PDM (B) with bracket after loosening the mounting nuts (2EA) and screw (1EA).
4.
In case of Canada, remove the PDM with bracket (A) after loosening the mounting nuts and screws and shear bolt.

Do not reuse the shear bolts. When installing the new shear bolts to the smart key unit, tighten the shear bolts until its head is cut off.
5.
Remove the PDM from the bracket after disconnecting the connectors.

Installation

1.
Install the power distribution module.
2.
Install the glove box housing.

    See also:

    Room lamp
    To turn the room lamp ON or OFF, push the switch or lens. CAUTION Do not leave the lamp switches on for an extended period of time when the vehicle is not running. ...

    Flex Steer. Components and Components Location
    Components Location 1. Flex steering switch ...

    Components and Components Location
    Components 1. Sub frame 2. Coil spring 3. Upper arm 4. Assist arm 5. Trailing arm 6. Rear axle ...