Hyundai Sonata: Power Seat Control Switch. Repair procedures
Inspection
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
the power seat switch.
A : Power seat control switch
B : Lumber support switch
Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the seat side cover (A).
(Refer to the BD group - "Front seat")
|
3. |
Disconnect the power seat control switch connector (A).
|
4. |
Loosen the power seat control switch (A) mounting screws (3EA).
|
Installation
|
1. |
Connect the connectors and reassemble the IMS control switch.
|
2. |
Reassemble the seat side cover.
|
Power Seat Control Switch. Schematic Diagrams
Circuit Diagram ...Seat Heater Switch. Schematic Diagrams
Circuit Diagram ...See also:
Trunk Trim. Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
...
Seat Heater. Components and Components Location
Component Location
...
Positive Crankcase Ventilation (PCV) Valve. Description and Operation
Operation Principle
...