Hyundai Sonata: Power Window Motor. Repair procedures
Inspection
Front Power Window Motor Inspection
1. |
Remove the front door trim panel.
(Refer to the BD group - "Front door")
|
2. |
Disconnect the connector from the motor.
|
3. |
Connect the motor terminals No.2 and No.3 directly to battery
voltage (12V) and check that the motor operates smoothly.
If the operation is abnormal, replace the motor.
[Safety Power Window]
|
4. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction.
If the operation is abnormal, replace the motor.
|
Rear Power Window Motor Inspection
1. |
Remove the rear door trim panel.
(Refer to the BD group - "Rear door")
|
2. |
Disconnect the 2P connector from the motor.
|
3. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction.
If the operation is abnormal, replace the motor.
|
Power Window Motor. Schematic Diagrams
Circuit Diagram ...Power Window Switch. Schematic Diagrams
Circuit Diagram Driver Power Window Switch Passenger Power Window Switch Rear Power Window Switch ...See also:
XM radio
Using XM satellite Radio
Your vehicle is equipped with a 3 month complimentary period of XM Satellite
Radio. XM provides access to over 130 channels of music, information, and entertainment
progr ...
Repair procedures
Inspection
Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the GDS. GDS operates
actuator quickly to monitor, input/output value and self diagnosis.
The f ...
SRS Control Module (SRSCM). Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before b ...